|
GGE Corp., Limited
2 Floor, B6 Building, 2nd Industrial district, Shi'ao, Langqin Road, Dalang, Longhua, Bao'an District, Shenzhen 518109 China
Tel:+86-755-88257880
Fax:+86-755-88257891
CEP: +86-13244899899
CP: Ms Megan Deng
E-mail: sales@chinagge.com
www.chinagge.com
|
|
| |
| Wiring Outdoor Wall Lighting Fixtures |
|
|
|
When you are wiring outdoor lighting wall fixtures, it is very important that the wires correctly. If you are renewing new light on the wires in the preparation or manufacture of new cable to create a new fixture, make sure to use the right tools and equipment, and follow any guidelines the manufacturer.
1 - Energy
Check that the breaker box to your home and "stop" any breaker valves leading to the area of the wires will be working in. It is essential that is not the flow of electricity through the circuit when dealing with bare wires.
To make sure that was put circle, and back again to the area of light and run the outlet of the light in the list or fixture make sure that it does not come on.
2 - Establishment of a wire
To create a new cycle of the existing wiring, you will need the proper electrical wiring, which should have the same amount specified current need. Installation of wires that have less current will cause a failure. Switch off the breaker to the intersection before proceeding to contact any new wires to it.
Ads by Google
Connect the new junction box correctly and then run through the path you have chosen.
3 - Forward
If the light fixture, which is trying to create on the other side of the wall outside that match the new attach, you simply need to dig a hole through the wall to guide the wires and install a new light. Installation of electrical box inside the wall can help to maintain the wires and if a new light fixture and electrical wiring that links joined by the screw, you can use the box for storage.
4 - holes
If you need to create a small hole in the wall to run through the electrical wiring of the box, and it would be appropriate for the fixture on a new light on this hole in front of electrical box. Once you're done you can then screw the light of the mounting bracket game against the wall. This category will come with the installation of your new light, that once you mounted securely, and will be able to paste the cover of the game him a new light.
5 - Installation and light fixtures in the open air
This is usually 2 mounting screws. Will bracket the growing need to attach and partnership holes to match up with the installation of the outside. To marry each other, and screw mount outer arc. After that, you can put the bulb in the light of your new installation of Foreign Affairs. Once you have completed the installation of the bulb, and return to the breaker box and flip the power switch again. Back to your new fixture in the open air and light it. |
| |
|
|
.jpg)
